

Installation
Indoor and outdoor
Capacity
10kWh
Product Details
Power
Up to 10kW
Dimensions
W794 H718 D273mm

Battery Management System (BMS)
​
Our optimized circuit design and proprietary ECM algorithm achieved the battery pack state-of-charge SOC estimation accuracy <3% which allows more energy and power to be drawn from the pack than conventional designs.
Lithium Iron Phosphate (LFP)
Battery cell is the most important component of every energy storage device. We selected Lithium Iron Phosphate from CATL for batter reliability, product safety and longevity (6000 cycles*).
*1C/1C, 100% depth-of-discharge, 80% capacity retention, guaranteed performance from CATL
High Performance without Compromising Reliability
Built for Safety

​
Fire Extinguishing
​
Capsulated Aerosol fire extinguisher is installed. The Aerosol blocks the heated surface from contacting O2 for further exothermic reaction, upon release, the particles fill the enclosure space within 3 seconds to stop fire occurring in extreme situations.
Thermal Isolation
​
Aerogel insulation pads are applied for breaking thermal links between battery cells inside the battery module. It’s low thermal conductivity* and low density** provides thermal isolation without compromising the product weight.
*Low thermal conductivity at 0.018 W/m-K, more insulating than standing air.
** Low density at 0.375 g/cm3, much lighter than epoxy pads
Built for Versatility

Radiation Cooling
​
Proprietary nano-material surface coating is applied on the enclosure to allow heat -exchange, not only with the surrounding but also with the outer space (-270°C), which keeps the battery cool under direct sun exposure in hot climate.
Silicone Heating
​
Silicone heating pad is applied for outdoor use in cold climates. The heating operation is optimized by the BMS to preheat the battery to its optimum operating temperature before use.